Shroud Install
Yes, I used a set of proper head space gauges and rigged up a jig and a guide to hold and maintain the angle of contact on the flaps so that I...
Shroud Install
I ended up taking a file to it last night and got it to work. Now I've got to fix the head spacing. Have you ever trimmed your locking flaps? I'm...
Shroud Install
I had the same issue. I did indeed take enough off the shroud using a belt sander to get a correct fit up with out using excessive torque. It only...
Shroud Install
When installing the barrel shroud onto an SMG receiver, it clocks to about 45 degree from aligned at hand tight. I don't expect I will be able to...
DPM Booster
My first build has always suffered form inconsistent performance. As Rick is well aware we did a lot of back and forth on what the issue may be in...
FG42 Owners
If you have one of our FG42-2 rifles, please share your experiences here and let us and everyone else know what you think! We can also answer...
Build Pics/Information Thread
I understand getting bogged down. I had my kit for a year before I started welding. Lucky thing was my shroud was intact when I got the kit. We...
Build Pics/Information Thread
[QUOTE] Sounds good. I have gotten bogged down. I have the shroud all welded up and the rear section is on. Next will be to do the front section....
Build Pics/Information Thread
[QUOTE]I also bought the CC jig. It was helpful, but the jig itself was a project. The width along the jig varied .015 and would not fit in my...
